National Instruments Drivers for ASET

The information below describes known-good configurations. Other drivers and cards may work as well, please contact us if you have questions about a particular configuration.


These drivers work for ASET-LV4 systems with the following cards:

- PCI-62xx, USB-62xx, PCIe-63xx Multifunction DAQ
- IMAQdx for USB cameras (via DirectShow), PCI-1411 Frame grabber
- PCI-73x4 Motion control, Sensapex manipulator

NI-DAQmx 9.5.5 (1,548MB)
NI-Motion 8.4 (462MB)
NI Vision Acquisition Software 2012.08 (1,601MB)

The version of ASET-LV4 intended to work with the above cards is: ASET-LV4 (5.62MB)


These drivers work for ASET 2.xx systems with the following cards:

- PCI-622x Multifunction DAQ
- PCI-1411 Frame grabber
- PCI-73x4 Motion control

NI-DAQ 7.4.1 CD1 (529,627kb)
NI-DAQ 7.4.1 CD2 (178,640kb)
- always install 'Traditional' NI-DAQ 7.4

NI-DAQ 7.5.0 (413,874kb)
- install NI-DAQmx 7.5 if you have a PCI-6229 or the 37-pin connector version of the PCI-6221

NI-Motion 6.1.2 (113,083kb)

NI-IMAQ 3.0.1 (118,157kb)

The version of ASET intended to work with the above cards on WinXP is: ASET 2.00 for WinXP (468kb)


send more information

Maintained by Anastasia Karplus
email: sia@sciencewares.com
last updated =12/12/2013
Copyright © 2009 Science Wares, Inc., all rights reserved.